|
| |
TM 9-2320-304-14&P
5-230
Direct Support and General Support Maintenance (Cont)
5-43. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
WARNING
Left front support bracket weighs 98 lbs. (44 kg). Attach lifting device to prevent possible
injury to personnel.
(11) Attach lifting device to left front support bracket (13).
(12) Position left front support bracket (13) and stowage box (10) on left-side frame rail (4).
NOTE
Do not tighten any screws until all screws are installed.
(13) Install two screws (14), two nuts (15), six screws (16), six nuts (17), five screws (18), five
nuts (19), two plates (20), four screws (21), four nuts (22), two screws (23), and two nuts (24).
Tighten screws.
(14) Install two plugs (25).
(15) Remove lifting device from left front support bracket (13).
WARNING
Right front support bracket weighs 98 lbs. (44 kg). Attach lifting device to prevent possible
injury to personnel.
(16) Attach suitable lifting device to right front support bracket (26).
(17) Position right front support bracket (26) on right-side frame rail (2).
NOTE
Do not tighten any screws until all screws are installed.
(18) Install four screws (27), four nuts (28), five screws (29), five nuts (30), screw (31), and nut (22).
Tighten all screws.
(19) Remove lifting device from right front support bracket (26).
Change 1
|
