|
| |
TM 9-2320-304-14&P
5-217
Direct Support and General Support Maintenance (Cont)
WARNING
Main frame and hook arm combined weight is 2,100 lbs. (953 kg). Attach suitable lifting
device prior to installation to prevent possible injury to personnel.
CAUTION
Wooden blocks supporting main frame can fall when main frame is supported with a lifting
device. Have soldier prevent wooden blocks from falling or damage to equipment may
result.
(16) Attach lifting device to hook arm (9).
(17) Turn ENGINE switch (10) to ON position.
(18) Soldier A press main frame safe lowering button (11) while Soldier B, using lifting device, raises
hook arm (9) and main frame (12).
(19) Support main frame (12) in two places with wooden blocks.
(20) Turn ENGINE switch (10) to OFF position.
(21) Remove lifting device from hook arm (9).
WARNING
Adhesives, solvents, and sealing compounds can
burn easily, can give off harmful vapors, and are
harmful to skin and clothing. To avoid injury or
death, keep away from open fire and use in a
well-ventilated area. If adhesive, solvent, or
sealing compound gets on skin or clothing, wash
immediately with soap and water.
(22) Coat threads of two rubber bumpers (1)
with sealing compound.
(23) Install two rubber bumpers (1) on
compression frame (3) with
locknuts (2).
c. Follow-on Maintenance.
(1) Install main cylinder manifold (Para 5-39).
(2) Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
|
