|
| |
TM 9-2320-304-14&P
5-197
Direct Support and General Support Maintenance (Cont)
5-38. LOAD HANDLING SYSTEM (LHS) HOOK ARM/MAIN FRAME CYLINDER
REPAIR.
Special Tools
Tool Kit, General Mechanic’s, Item 32,
Appendix B
Drill Set, Twist, Item 5, Appendix B
Drill, Electric, Portable, 1/4 in., Item 6,
Appendix B
Gloves, Chemical Oil Protective, Item 11,
Appendix B
Goggles, Industrial, Item 12, Appendix B
Pan, Drain 4 gal, Item 16, Appendix B
Stone, Sharpening, Item 24, Appendix B
Vise, Pipe, Chain, Item 35, Appendix B
Wrench Set, Socket 3/4 in. Drive, Item 45,
Appendix B
Wrench, Torque, (0-175 lb-ft. [0-237 NSm])
Item 48, Appendix B
Lifting Device, Minimum Capacity 250 lbs.
(114 kg)
Wooden Blocks (2), Appendix H
This task covers:
a. Disassembly
c. Assembly
b. Cleaning/Inspection
d. Follow-on Maintenance
INITIAL SETUP
Supplies
Cloth, Cleaning, Item 5, Appendix F
Oil, Hydraulic, Item 12, Appendix F
Solvent, Drycleaning, Item 18, Appendix F
Plug, Nylon, Item 33, Appendix K
Screw, Item 42, Appendix K
Seal Kit, Item 45, Appendix K
Personnel Required
MOS 63W, Wheel vehicle repairer
Equipment Condition
TM or Para
Condition Description
Para 5-37
Hook arm cylinder
removed
Para 5-40
Main frame cylinder
removed
References
None
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
a. Disassembly.
WARNING
Cylinder weighs in excess of 210 lbs. (95
kg). Attach suitable lifting device prior to
lifting to prevent possible injury to
personnel.
(1) Attach lifting device to cylinder (1).
|
