|
| |
TM 9-2320-304-14&P
5-191
Direct Support and General Support Maintenance (Cont)
WARNING
Hook arm cylinder weighs 210 lbs. (95 kg).
Attach suitable lifting device prior to
removal to prevent possible injury to
personnel.
(5) Attach lifting device to left side
cylinder (6).
(6) Remove two screws (7), lockwashers (8),
washers (9), cylinder shafts (10), and
left side cylinder (6) from hook arm (4)
and main frame (5). Discard
lockwashers.
(7) Remove lifting device from left side
cylinder (6).
b. Installation.
WARNING
Hook arm cylinder weighs 210 lbs. (95 kg).
Attach suitable lifting device prior to
installation to prevent possible injury to
personnel.
(1) Attach lifting device to left side
cylinder (1).
(2) Install barrel end (rear) of left side
cylinder (1) with cylinder shaft (2) to
main frame (3).
(3) Install washer (4), lockwasher (5), and
screw (6) on cylinder shaft (2).
(4) Lower left side cylinder (1) and remove
lifting device.
|
