|
| |
TM 9-2320-304-14&P
5-190
Direct Support and General Support Maintenance (Cont)
5-37. LOAD HANDLING SYSTEM (LHS) HOOK ARM CYLINDER REPLACEMENT
(CONT).
a. Removal.
WARNING
·
Hook arm cylinders weighs 210 lbs.
(95 kg). Attach suitable lifting device
prior to removal to prevent possible
injury to personnel.
·
Ensure hook arm assembly is
supported with wooden blocks prior
to removal to prevent possible injury
to personnel.
(1) Attach lifting device to right side
cylinder (1).
(2) Remove two locknuts (2) and
lockwashers (3) from right side
cylinder (1) by bending lockwasher (3)
tabs out of locknut (2) slots. Discard
locknuts and lockwashers.
(3) Using lifting device, remove right side
cylinder (1) form hook arm (4) and main
frame (5).
(4) Remove lifting device from right side
cylinder (1).
|
