|
| |
TM 9-2320-304-14&P
5-134
Direct Support and General Support Maintenance (Cont)
5-26. COMPRESSION FRAME REPAIR (CONT).
NOTE
Repeat Steps (15) and (16) for right side
hoses 2588, 2888 and 2889.
(15) Install three adapters (21) at front of
compression frame (2) with three
lockwashers (22) and nuts (23).
(16) Install hoses 2887 (24), 2666 (25), and
2890 (26) on three adapters (21).
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in a
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(17) Apply sealing compound to threads of
screws (27).
(18) Install eight tube clamp halves (28) and
four cover plates (29) on left side
compression frame tube (10) with
sixteen washers (30), eight
lockwashers (31), and screws (27).
|
