|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
5-72
Direct Support and General Support Maintenance (Cont)
5-7. DIRECT/GENERAL SUPPORT TROUBLESHOOTING PROCEDURES (CONT).
Table 5-2. Direct Support/General Support Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS)
11. LHS HOOK ARM DISENGAGES FROM FLATRACK WHILE UNLOADING (CONT).
NOTE
Clearance given is for a hook bar with or without any wear.
Step 2. Check clearance between LHS hook arm and flatrack hook bar.
If clearance is less than 0.875 in. (22.2 mm), fault not corrected. Notify supervisor.
If clearance is greater than 0.875 in. (22.2 mm) go to Step 3. of this Fault.
|
