|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
5-71
Direct Support and General Support Maintenance (Cont)
Table 5-2. Direct Support/General Support Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS)
11. LHS HOOK ARM DISENGAGES FROM FLATRACK WHILE UNLOADING.
NOTE
The 1/8 in. (3.175 mm) measurement is for the bottom of the hook bar only.
Step 1. Check hook bar wear.
If wear at lower back side of hook bar is greater than 1/4 in. (6.35 mm) or greater
than 1/8 in. (3.175 mm) at bottom of hook bar, repair flatrack hook bar. Refer to
TM 9-3990-206-14&P and go to Step 3. of this Fault.
|
