|
| |
TM 9-2320-304-14&P
4-235
Organizational Maintenance Instructions (Cont)
c. Typical Clip, Clamp, and Bracket Removal.
NOTE
·
All clips, clamps, and brackets are
removed and installed the same way.
·
Mark position of brackets.
(1) Remove locknut (1), washer (2), and
cushion clip (3).
(2) Remove screw (4), washer (5), plate (6),
and two clamps (7).
(3) Remove nuts (8), screws (9), and
bracket (10).
d. Typical Clip, Clamp, and Bracket Installation.
(1) Install bracket (10), screws (9), and
nuts (8).
(2) Install two clamps (7), plate (6),
washer (5), and screw (4).
(3) Install cushion clip (3), washer (2), and
locknut (1).
|
