|
| |
TM 9-2320-304-14&P
4-234.36
Organizational Maintenance Instructions (Cont)
4-53.6 CONTAINER HANDLING UNIT (CHU) LONG STRUT BRACKET ASSEMBLY
REPAIR (CONT).
e. Installation.
(1)
Install right strut support
bracket (1) on frame (2)
with five screws (3) and
nuts (4). Tighten nuts.
(2)
Install left strut support
bracket (5) and rear ladder
bracket (6) on frame (2)
with five screws (3) and
nuts (4). Tighten nuts.
(3)
Install cross support
brace (7) on right strut
support bracket (1) and
left strut support
bracket (5) with four
screws (8) and nuts (9).
Tighten nuts.
WARNING
Use care when installing snap and
retaining rings. Snap and retaining rings
are under spring tension and can act as
projectiles when released and could cause
eye injury.
NOTE
Beveled edge of spacer faces bearing in
long strut.
(4)
Install long strut (10) and spacer (11) in
bracket assembly (12) with pin (13) and
retaining ring (14).
Change 1
|
