|
| |
TM 9-2320-304-14&P
2-17
Operating Instructions (Cont)
WARNING
When loading or unloading flatracks on uneven ground (side slope or downgrades up to 5
degrees), it may be necessary to apply truck service brakes to prevent truck rollaway or
severe injury or death to personnel could result.
CAUTION
·
If LHS OVER LOAD indicator illuminates but loading operation continues, operator
is cautioned that LHS is nearing maximum capacity. In this situation operator
should determine if payload is evenly distributed on flatrack or if flatrack load
exceeds 25,000 lbs. (11 340 kg) for LHS or 24,000 lb. (10 886 kg) for LHS with CHU
kit. If any of these conditions exist, operator must redistribute or reduce the
payload or damage to equipment may occur.
·
Load must be evenly distributed on the pallet. Uneven load distribution may cause
LHS OVER LOAD indicator to give false signals and cause LHS to operate
incorrectly. Damage to equipment may result.
·
If LHS OVER LOAD indicator illuminates and normal operation has stopped,
return load to original position and redistribute or reduce payload weight or
equipment damage may occur.
·
Ensure that parking brake is not applied before starting load sequence or damage to
equipment may occur.
(14) Move joystick (7) to LOAD position, allowing truck to be pulled under flatrack.
Change 1
|
