|
| |
TM 9-2320-304-14&P
2-16
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
NOTE
LHS will only operate when transmission range selector is in N (Neutral).
(12) If lift hook (8) fails to engage the hook bar (2):
(a) Release the joystick (7).
(b) Set the transmission range selector (1) to D (Drive), release service brake pedal (3) and
move truck forward to clear flatrack.
(c) Move the joystick (7) to UNLOAD position until lift hook (8) is below level of hook bar (2).
(d) Repeat steps (7) through (11).
(13) When correctly engaged, set the transmission range selector (1) to N (Neutral) and release
service brake pedal (3).
|
