|
| |
TM 9-2320-304-14&P
4-234.26
Organizational Maintenance Instructions (Cont)
4-53.5 CONTAINER HANDLING UNIT (CHU) REAR BRACKET ASSEMBLY
REPLACEMENT (CONT).
NOTE
Perform step (3) for right side of truck only.
(3)
Remove locknut (7), two washers (8),
and screw (9) from rear roller
bracket (5). Discard locknut.
(4)
Soldier A and Soldier B remove five
screws (10) and locknuts (11) from rear
roller bracket (5), frame (12), and rear
crossmember (13). Discard locknuts.
(5)
Soldier A and Soldier B remove five
screws (14) and locknuts (15) from rear
roller bracket (5) and frame (12).
(6)
Soldier A and Soldier B remove rear
roller bracket (5) from truck.
(7)
Remove lifting device from rear roller
bracket (5).
(8)
Remove screw (16), washer (17), and wire rope (18) from rear roller bracket (5).
(9)
Remove screw (19), washer (20), and wire rope (18) from rear roller bracket (5).
NOTE
Perform step (10) if wire rope is damaged.
(10)
Remove swaging sleeve (21) from wire rope (18).
(11)
Remove two screws (22), locknuts (23), and stow plate (24) from rear roller bracket (5). Discard
locknuts.
Change 1
|
