|
| |
TM 9-2320-304-14&P
4-234.21
Organizational Maintenance Instructions (Cont)
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
(3)
Apply a light coat of antiseize to outer
surface of bearing (7).
(4)
Install bearing (7), spacer (8), and
retaining ring (9) in short strut (10).
(5)
Install grease fitting (11) in short
strut (10).
(6)
Apply sealing compound to threads of
screw (12).
(7)
Install spring (13), washer (14),
washer (15), and screw (12) on short
strut (10).
e. Installation.
WARNING
Adhesives, solvents, and sealing
compounds can burn easily, can give off
harmful vapors, and are harmful to skin
and clothing. To avoid injury or death,
keep away from open fire and use in
well-ventilated area. If adhesive, solvent,
or sealing compound gets on skin or
clothing, wash immediately with soap and
water.
NOTE
There are two pin bracket assemblies.
Both are installed the same way. Right
side is shown.
(1)
Apply sealing compound to threads of
four screws (1).
(2)
Install four screws (1) and pin
bracket (2) on arm assembly (3).
Change 1
|
