|
| |
TM 9-2320-304-14&P
4-234.7
Organizational Maintenance Instructions (Cont)
(6)
Remove two grease fittings (16) from
slider pivot (4).
(7)
Remove two seals (17) from slider
pivot (4). Discard seals.
(8)
Remove ten socket head screws (18),
locknuts (19), and wear plate (20) from
slider (5). Discard locknuts.
(9)
Remove two self-tapping screws (21),
reflector housing (22), and reflector (23)
from slider (5). Discard self-tapping
screws.
(10)
Remove grease fitting (24) from
slider (5).
(11)
Remove roll pin (25), handle (26),
spring (27), and pin (28) from slider (5).
Discard roll pin.
Change 1
|
