|
| |
TM 9-2320-304-14&P
4-234.4
Organizational Maintenance Instructions (Cont)
4-53.2 CONTAINER HANDLING UNIT (CHU) SLIDER/PIVOT ASSEMBLY REPAIR.
Special Tools
Tool Kit, General Mechanic’s: Automotive,
Item 33, Appendix B
Compressor Unit, Air, Item 2.2, Appendix B
Gloves, Chemical Oil Protective, Item 11,
Appendix B
Goggles, Industrial, Item 12, Appendix B
Gun, Air Blow, Item 12.1, Appendix B
Lifting Device, Minimum Capacity 140 lbs.
(64 kg)
Pliers, Retaining Ring, Item 19, Appendix B
This task covers:
a. Removal
c. Cleaning/Inspection
e. Installation
b. Disassembly
d. Assembly
f. Follow-on Maintenance
INITIAL SETUP
Personnel Required
MOS 63S, Heavy wheel vehicle mechanic (2)
Equipment Condition
TM or Para
Condition Description
TM 9-2320-279-10 Engine OFF
TM 9-2320-279-10 Wheels chocked
Para 4-45.1
Limit switch removed
Para 2-10.1
Slider in container mode
References
None
Models
M1120
Test Equipment
None
Special Environmental Conditions
None
General Safety Instructions
None
Supplies
Grease, Item 8, Appendix F
Sealing Compound, Item 15, Appendix F
Sealing Compound, Item 16, Appendix F
Locknut (10), Item 3.1, Appendix K
Locknut (2), Item 11, Appendix K
Supplies (cont)
Pin, Cotter (2), Item 31.1, Appendix K
Pin, Roll, Item 32.1, Appendix K
Ring, Retaining, Item 41.1, Appendix K
Screw, Self-Tapping (2), Item 42.1,
Appendix K
Seal (2), Item 43.1, Appendix K
Change 1
|
