|
| |
TM 9-2320-304-14&P
4-226
Organizational Maintenance Instructions (Cont)
4-50. REAR FENDER REPLACEMENT (CONT).
(8) With the aid of an assistant, remove
locknut (18), screw (19), and brace (20)
from truck frame (21). Discard locknut.
(9) With the aid of an assistant, remove
locknut (22), screw (23), spacer (24), and
fender support arm (7) from truck
frame (21). Discard locknut.
b. Installation.
(1) With the aid of an assistant, position
fender support arm (1), spacer (2),
screw (3), and locknut (4) on truck
frame (5).
(2) With the aid of an assistant, install
brace (6), screw (7), and locknut (8) in
truck frame (5).
(3) With the aid of an assistant, tighten
locknut (4) on screw (3).
(4) Install two braces (9) on rear fender (10)
using four screws (11) and locknuts (12).
(5) Position rear fender (10) on fender
support arm (1).
|
