|
| |
TM 9-2320-304-14&P
4-215
Organizational Maintenance Instructions (Cont)
b. Installation.
(1) Attach lifting device to roller (1).
WARNING
Horizontal roller weighs 75 lbs (34 kg).
Attach suitable lifting device prior to
installation to prevent possible injury to
personnel.
(2) Using lifting device, position roller (1) in
roller assembly (2).
(3) Install lockplate (3), two
lockwashers (4), two screws (5), and lube
fitting (6) in roller assembly (2).
NOTE
Nut is installed properly when nut is
tightened and roller does not bind.
(4) Install thrust washer (7),
lockwasher (8), nut (9), and lube
fitting (10) on roller (1). Tighten nut.
(5) Bend tab of lockwasher (8) into slot of
nut (9).
(6) Remove lifting device from roller (1).
c. Follow-on Maintenance.
(1) Install rear roller assembly (Para 4-48).
(2) Install angled rollers (Para 4-47).
(3) Lubricate roller assembly (Para 3-2).
(4) Remove wheel chocks (TM 9-2320-279-10).
END OF TASK
|
