|
| |
TM 9-2320-304-14&P
4-214
Organizational Maintenance Instructions (Cont)
4-46. HORIZONTAL ROLLER REPLACEMENT (CONT).
(2) Remove lube fitting (2), bend
lockwasher tab out of nut slot and
remove nut (3), lockwasher (4), and
thrust washer (5) from roller (6) at
underside of roller assembly (1). Discard
lockwasher.
(3) Remove two screws (7), lockwashers (8),
lockplate (9), and lube fitting (10) from
roller assembly (1). Discard
lockwashers.
(4) Attach lifting device to rear roller (6).
WARNING
Horizontal roller weighs 75 lbs (34 kg).
Attach suitable lifting device prior to
removal to prevent possible injury to
personnel.
(5) Using lifting device, remove roller (6)
from roller assembly (1).
(6) Remove lifting device.
|
