|
| |
TM 9-2320-304-14&P
4-184.3
Organizational Maintenance Instructions (Cont)
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(3)
Put PTO ENGAGE switch (1) in ON position. Make sure indicator light (2) comes on.
(4)
Set hydraulic selector switch (3) to MAN H.A. position and raise hook arm (4) until hook arm
cylinder pivot pin (5) is 25 in. (63.5 cm) from main frame (6).
(5)
Set hydraulic selector switch (3) to MAN M.F. position and raise main frame (6) until hook arm
cylinder pivot pin (5) is 45 in. (114.3 cm) from main frame (6).
(6)
Shut OFF engine.
(7)
Disconnect batteries (TM 9-2320-279-20).
Change 1
|
