|
| |
TM 9-2320-304-14&P
4-184.2
Organizational Maintenance Instructions (Cont)
4-37.1 CONTAINER HANDLING UNIT (CHU) PROXIMITY SWITCH AND SENSING
PLATE REPLACEMENT/ADJUSTMENT (HOOK ARM UP) (CONT).
(2)
Remove two nuts (3) and proximity
switch (4) from proximity switch
mount (5).
(3)
Remove two screws (6), lockwashers (7),
and proximity switch mount (5) from
two clamp halves (8). Discard
lockwashers.
NOTE
Perform step (4) if sensor plate is damaged.
(4)
Remove sensor plate (9) from LHS hook
arm (10).
b. Installation.
(1)
Connect batteries (TM 9-2320-279-20).
NOTE
·
Perform steps (2) through (18) if sensor plate was removed.
·
LHS is being raised to expose area to install sensor plate.
·
LHS will only operate when transmission range selector is in N (Neutral).
(2)
Start engine and stow LHS (TM 9-2320-279-10).
Change 1
|
