|
| |
Malfunction
Test or Inspection
Corrective Action
TM 9-2320-304-14&P
4-107
Organizational Maintenance Instructions (Cont)
Table 4-3. Load Handling System (LHS) Troubleshooting (CONT)
LOAD HANDLING SYSTEM (LHS) (CONT)
14. MAIN FRAME DOES NOT UNLOAD IN MANUAL MODE.
WARNING
The LHS hydraulic system operates at oil pressures up to 1,725 psi (11 894 kPa). Never
disconnect any hydraulic line or fitting without first dropping pressure to zero. Failure to
comply may result in serious injury or death to personnel.
Step 1. Check LHS hydraulic hoses 2887, 2888, 2889, 2890, 2666, and 2588 for damage, crimps, or
leaks, and check fittings for leaks.
If hoses are damaged, crimped, or leaking, tighten fittings or replace hoses.
|
