|
| |
TM 9-2320-304-14&P
2-96
Operating Instructions (Cont)
2-14. EMERGENCY PROCEDURES (CONT).
b. Manual Hydraulic Operation (LHS).
WARNING
Make sure operator, objects, and other personnel are clear of LHS and truck during LHS
operation or serious injury or death could result to personnel.
NOTE
In the event of electrical failure during loading or unloading, manual operation of main
manifold directional control valves will allow LHS operation until electrical failure can be
repaired.
(1) Pull out PARKING BRAKE control (1) and place transmission range selector (2) in N (Neutral).
(2) Put PTO ENGAGE switch (3) in ON position. Make sure indicator light (4) comes on.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(3) Set hydraulic selector switch (5) to MAN H.A. position, MAN M.F. position, or AUTO position.
|
