|
| |
TM 9-2320-304-14&P
2-93
Operating Instructions (Cont)
NOTE
Only remove center screw on engine side of LHS control box cover.
(14) On disabled truck, remove four screws (17), lockwashers (18), and LHS control box cover (19).
NOTE
Button may be stiff and hard to push in.
(15) Press and hold free flow valve override button (20). Press one or more of the following buttons
to return LHS to the stowed position: hook arm UP (21), hook arm DOWN (22), main frame
UP (23), main frame DOWN (24).
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(16) On both trucks, turn hydraulic selector switch (14) to OFF position.
(17) Put PTO ENGAGE switch (12) in OFF position on operable truck. Make sure indicator light (13)
goes off.
(18) Shut down engine on operable trucks.
(19) On disabled truck, turn ignition switch (15) to OFF.
|
