|
| |
TM 9-2320-304-14&P
2-92
Operating Instructions (Cont)
2-14. EMERGENCY PROCEDURES (CONT).
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(9) Start engine on operable truck.
NOTE
Steps (10) and (11) apply to operable truck only.
(10) Put PTO ENGAGE switch (12) in ON position. Make sure indicator light (13) comes on.
(11) Turn hydraulic selector switch (14) to AUTO position.
(12) If disabled truck has a failure in the hydraulic system, but not the electrical system, go to
step (13). If both systems have failed, go to step (14).
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(13) On disabled truck, turn ignition switch (15) to ON and turn hydraulic selector switch (14) to
AUTO position. Operate joystick (16) to return LHS to the stowed position. Go to step (16).
|
