|
| |
TM 9-2320-304-14&P
2-82.155
Operating Instructions (Cont)
b. Installing Front Lift Adapter onto Truck.
WARNING
·
Front lift adapter weighs 1,600 lbs. (726 kg). Personnel must stay clear when
installing or removing front lift adapter to LHS hook arm hook. Failure to comply
may result in injury or death to personnel.
·
Make sure front lift adapter is free of snow, ice, and mud when installing on LHS.
Front lift adapter may be unbalanced and may cause injury or death to personnel.
NOTE
For detailed instructions on how to operate the LHS, refer to “LHS Controls and Indicators”
(Para 2-1), “Picking Up a Flatrack in Auto Mode” (Para 2-9 b), and “Off-Loading Flatrack in
Auto Mode” (Para 2-9 c).
(1)
Start engine (TM 9-2320-279-10).
(2)
Put PTO ENGAGE switch (1) in ON position. Make sure indicator light (2) comes on.
(3)
Turn hydraulic selector switch (3) to AUTO mode.
(4)
Move joystick (4) to LOAD until hook (5) is below front lift adapter hook bar (6).
(5)
Back truck up and engage hook bar (6) with hook (5).
CAUTION
Engine speed must be at idle before using hydraulic switch, or damage to equipment may
result.
(6)
Move joystick (4) to LOAD and raise front lift adapter (7) approximately 12 in. (30 cm) off the
ground.
Change 1
|
