|
| |
TM 9-2320-304-14&P
2-82.151
Operating Instructions (Cont)
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(2)
Start engine (TM 9-2320-279-10).
(3)
Put PTO ENGAGE switch (2) in ON position. Make sure indicator light (3) comes on.
(4)
Turn hydraulic selector switch (4) to AUTO.
(5)
Move joystick (5) to UNLOAD until front lift adapter (1) is approximately 12 in. (30 cm) from
the ground.
Change 1
|
