|
| |
TM 9-2320-304-14&P
2-82.149
Operating Instructions (Cont)
(4)
Remove lock pin (7) from bracket (8) and rotate tab (9) up.
WARNING
ISO corner lock will become loose from front bottom corner casting of ISO container when
performing step (5).
(5)
Loosen handnut (10), rotate lock handle (11) 90 degrees, and remove ISO corner lock (5) from
front bottom corner casting (12) of ISO container (13).
(6)
Install ISO corner lock (5) on stowage tray (6) and rotate lock handle (11) 90 degrees.
(7)
Tighten handnut (10), rotate tab (9) to lock handnut (10), and install lock pin (7) in bracket (14).
(8)
Repeat steps (1) through (7) for left side.
Change 1
|
