|
| |
TM 9-2320-304-14&P
2-82.124
Operating Instructions (Cont)
2-10.6 TRANSPORT FRONT LIFT ADAPTER WITH HEMTT LHS WITHOUT
CONTAINER.
a. Front Lift Adapter in Locked Position (Transport Without Container).
WARNING
Front lift adapter weighs 1,600 lbs. (726 kg). Personnel must stay clear when installing or
removing front lift adapter to LHS hook arm hook. Failure to comply may result in injury or
death to personnel.
NOTE
There are two locking plates on front lift adapter. Both locking plates are locked and
unlocked the same way. Right side is shown.
(1) Remove quick release pin (1) from locking plate (2) and bracket (3).
(2) Rotate locking plate (2) down to engage LHS hook arm pivot pin (4).
(3) Install quick release pin (1) in locking plate (2) and bracket (5).
(4) Repeat steps (1) through (3) for left side.
b. Front Lift Adapter in Unlocked Position (Load and Unload Container, Install or Remove Front
Lift Adapter from LHS).
(1) Remove quick release pin (1) from locking plate (2) and bracket (5).
(2) Rotate locking plate (2) up to disengage LHS hook arm pivot pin (4).
(3) Install quick release pin (1) in locking plate (2) and bracket (3).
(4) Repeat steps (1) through (3) for left side.
Change 1
|
