|
| |
TM 9-2320-304-14&P
2-65
Operating Instructions (Cont)
(3) Back truck up in line with trailer and stop approximately 5 ft. (1.5 m) from trailer.
(4) Apply the service brake pedal (3) and set transmission range selector (4) to N (Neutral).
WARNING
·
Check for overhead power lines or other obstructions before attempting LHS
operation. LHS reaches a height of 17 ft. 2 in. (5.23 m) with ISO container. Serious
injury or death to personnel could result from contact with electrical power lines.
·
Check ground conditions for firmness and extreme sideways inclination before
picking up or off-loading a flatrack. Any ground instability beneath road wheels
could cause serious injury or death to personnel.
·
Prior to and during any load or unload cycle, all personnel should stay clear of LHS
and flatrack or serious injury or death to personnel could result.
CAUTION
Engine speed must be at idle before using hydraulic selector switch or damage to equipment
may result.
(5) Put PTO ENGAGE switch (5) in ON position. Make sure indicator light (6) goes on.
(6) Turn the hydraulic selector switch (7) to MAN H.A. position
|
