|
| |
TM 9-2320-304-14&P
2-60
Operating Instructions (Cont)
2-9. LOAD HANDLING SYSTEM (LHS) (CONT).
NOTE
It may be necessary to repeat the following steps several times to clear lift hook from hook
bar.
(23) Move the joystick (10) to UNLOAD position to allow top of lift hook (17) to clear hook bar (18).
NOTE
·
Do not move truck forward more than 3 in. (76.2 mm) to prevent flatrack from
pulling away from stops.
·
LHS will only operate when transmission range selector is in N (Neutral).
(24) Release the service brake pedal (16) and place transmission range selector (4) in D (Drive) and
move truck forward approximately 3 in. (76.2 mm). Apply service brake pedal (16).
(25) Move the joystick (10) to UNLOAD position to disengage lift hook (17) from hook bar (18).
(26) Set the transmission range selector (4) to N (Neutral) and pull out PARKING BRAKE
control (3).
(27) Inspect that rear flatrack rollers (11) have contacted trailer stops (15).
|
