|
| |
TM 9-2320-304-14&P
2-59
Operating Instructions (Cont)
(16) Move joystick (10) to LOAD position until front of flatrack is raised approximately 12 to 18 in.
(30 to 46 cm) above trailer deck height.
CAUTION
Engine speed must be at idle before using hydraulic selector switch, or damage to
equipment may result.
(17) Turn the hydraulic selector switch (9) to MAN M.F. position.
(18) Move the joystick (10) to UNLOAD position until flatrack rollers (11) contact trailer stops (15)
and front of flatrack guides are seated on trailer.
(19) Release the joystick (10).
(20) Inspect that rear flatrack rollers (11) on flatrack have contacted trailer stops (15).
(21) Apply the service brake pedal (16).
(22) Push in truck PARKING BRAKE control (3).
|
