| |
TM 9-2320-304-14&P
2-57
Operating Instructions (Cont)
(9) If not alined:
(a) Move joystick (10) to LOAD position.
(b) When flatrack is completely reloaded onto truck, release joystick (10).
(c) Repeat steps (4) through (7).
CAUTION
·
To avoid equipment damage, visually check that hook arm cylinders have fully
extended.
·
To avoid equipment damage, ensure that hook arm cylinders do not complete full
extension while operating at engine speeds above idle.
NOTE
LHS OVER LOAD indicator will come on when hook arm cylinders are fully extended and
joystick is activated.
(10) Move the joystick (10) to UNLOAD position and hold until hook arm cylinders (14) are fully
extended.
|