| |
TM 9-2320-304-14&P
5-270
Direct Support and General Support Maintenance (Cont)
5-43. CONTAINER HANDLING UNIT (CHU) KIT INSTALLATION (CONT).
WARNING
Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors,
and are harmful to skin and clothing. To avoid injury or death, keep away from open fire
and use in well-ventilated area. If adhesive, solvent, or sealing compound gets on skin or
clothing, wash immediately with soap and water.
NOTE
Make sure hole in pin end alines with hole for cushion clip.
(9) Apply sealing compound (Loctite 242) to threads of screw (8).
(10) Install screw (8) and cushion clip (9) to long strut (2).
(11) Aline long strut (2) with short strut (5).
(12) Using handle of arm assembly (6), rotate arm assembly and disengage flip lock (7).
(13) Position long strut (2) in short strut (5) and install pin (4) and quick release pin (3).
(14) Repeat steps (2) through (13) as necessary.
(15) Repeat steps (4) through (13) for left side.
Change 1
|