INSTALLATION - TM-9-2320-303-24-20358

TM 9-2320-303-24-2

FRAME RAIL EXTENSION AND REINFORCEMENT REPLACEMENT - CONTINUED

0278 00

INSTALLATION

NOTE

Steps 1 through 8 are for right side only.

Steps 9 through 17 are for left side only.

Install stiffener (34), two washers (32), two capscrews (33), two washers (31), and two nuts (30).

WARNING

Frame rail reinforcement weighs 100 lb (45.4 kg). Use minimum of three personnel to remove or install

parts from or on frame rail reinforcement. Failure to do so could result in injury to personnel.

With two personnel holding frame rail reinforcement (36), install two washers (27), two capscrews (28), two washers

(38), and two nuts (23) hand-tight.

Install frame rail extension (35) between frame rail (26) and frame rail reinforcement (36).

Install six washers (37), six capscrews (39), six washers (25), and six nuts (29). Do not tighten nuts.

Remove two nuts (23), two washers (38), two capscrews (28), and two washers (27).

Install transmission cooler mounting plate (24) between frame rail (26) and frame rail reinforcement (36).

Install bracket (40), five washers (27), five capscrews (28), five washers (38), and five nuts (23).

Tighten nuts (10 and 16).

Install stiffener (15), two washers (14), two capscrews (13), two washers (21), and two nuts (22).

10.

With two personnel holding frame rail reinforcement (11), install two washers (1), two capscrews (20), two washers (7),

and two nuts (8) hand-tight.

11.

Install frame rail extension (12) between frame rail (2) and frame rail reinforcement (11).

12.

Install three washers (4), three capscrews (9), three washers (18), and three nuts (19). Do not tighten nuts.

13.

Install two screws (10), two washers (16), and two nuts (17).

14.

Remove two nuts (8), two washers (7), two capscrews (20), and two washers (1).

15.

Install power steering reservoir plate (3) between frame rail (2) and frame rail reinforcement (11).

0278 00-4