 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
FRONT AXLE CASTER ADJUSTMENT
THIS WORK PACKAGE COVERS
Adjustment
INITIAL SETUP
Tools and Special Tools - Continued
Maintenance Level
Wrench set, socket, 3/4 in drive (Item 113, WP
Direct Support
Tools and Special Tools
Materials/Parts
Tool kit, general mechanic's (Item 102, WP 0313
Compound, antiseize (Item 11, WP 0312 00)
Wrench, torque, 100-600 lb-ft (Item 112, WP 0313
ADJUSTMENT
NOTE
The following caster adjustment must be performed with the assistance of a local Freightliner dealer or a
supporting Contractor Logistic Support (CLS) maintenance activity.
1.
Measure caster angle. Angle must be +3.5 to +6.5 degrees.
NOTE
Perform steps 2 through 9 if caster angle is incorrect.
2.
Remove four nuts (4) and washers (3) from two U-bolts (1).
1
2
8
7
6
3
4
5
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals