 |
|||
|
|
|||
|
Page Title:
Installation of Rear Cover Module |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
TRANSMISSION OVERHAUL - CONTINUED
0248 00
ASSEMBLY - CONTINUED
Installation of Rear Cover Module
1.
Install new rear cover gasket (37) on main housing (24).
2.
Place rear cover module (36) on main housing (24) using suitable hoist and sling as a lifting fixture.
3.
Install 19 bolts (35). Evenly tighten bolts to 66-81 lb-ft (90-110 Nm).
4.
Retighten retainer locknut using tool (J37035-1) to 55-65 lb-ft (74-88 Nm).
NOTE
Do not reuse locknut retainer locking tang once it has been bent. If all tangs have been used (bent), replace
locknut retainer.
5.
Locate one new locking tang on retainer and bend it up to hold retainer locknut.
24
37
36
402-599
35
0248 00-52
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals