 |
|||
|
|
|||
|
Page Title:
Torque Converter Module Disassembly |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-2
TRANSMISSION OVERHAUL - CONTINUED
0248 00
MODULE OVERHAUL
Torque Converter Module Disassembly
NOTE
Prior to disassembling torque converter, note balance marks or mark a line across converter cover to pump
assembly with a scribe. These marks will ensure correct assembly of torque converter and reduce balance
problems.
1.
Place converter assembly (6) on a flat work surface with pump drive tangs downward.
2.
Remove 36 nuts (1) from outer diameter of cover assembly (2).
3.
Remove 36 T-headed bolts (12) from outer diameter of pump assembly (13).
4.
Carefully, without prying, remove cover assembly (2) from pump assembly (13).
5.
Remove and discard O-ring (15) from between converter assembly halves.
6.
Remove turbine assembly (28) from cover assembly (2).
7.
Remove stator assembly (19) from pump assembly (13).
8.
Remove thrust bearing race (14) from pump assembly (13).
9.
Remove thrust bearing assembly (27) from turbine assembly (28).
10.
Remove bearing assembly (16), race (17), and selective shim (18) from pump assembly (13).
11.
Remove retaining ring (25) and star plate (26) from stator assembly (19).
2
6
1
3
5
4
7
8
9
10
21
27
28
26
11
25
24
23
22 20
18
17
19
16
15
14 13
12
0248 00-10
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals