RADIO WIRING HARNESS REPLACEMENT

TM 9-2320-303-24-2

RADIO WIRING HARNESS REPLACEMENT

0246 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Maintenance Level

Materials/Parts

Straps, tiedown (Item 41, WP 0312 00)

Direct Support

Equipment Condition

Tools and Special Tools

Head liners removed (WP 0177 00)

Master battery switch in OFF position (TM 9-2320-

Tool kit, general mechanic's (Item 102, WP 0313

303-10)

REMOVAL

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion clamps, and screw terminals.

Only remove hardware securing harness or lead to be removed.

Disconnect and remove radio wiring harness using illustration as a guide.

INSTALLATION

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion clamps, and screw terminals.

Make sure harness is secure and all hardware is tight.

Install and connect radio wiring harness (1) using illustration as a guide.

Install head liners (WP 0177 00).