OVERHEAD CAB WIRING HARNESS REPLACEMENT

TM 9-2320-303-24-2

OVERHEAD CAB WIRING HARNESS REPLACEMENT

0240 00

THIS WORK PACKAGE COVERS

Removal, Installation

INITIAL SETUP

Materials/Parts - Continued

Maintenance Level

Direct Support

Tags, marker (Item 42, WP 0312 00)

Tools and Special Tools

Equipment Condition

Tool kit, general mechanic's (Item 102, WP 0313

Head liners removed (WP 0177 00)

Materials/Parts

Master battery switch in OFF position (TM 9-2320-

303-10)

Straps, tiedown (Item 41, WP 0312 00)

REMOVAL

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion clamps, and screw terminals.

Only remove hardware securing harness or lead to be removed.

Disconnect and remove overhead cab wiring harness using illustration and table as a guide.

INSTALLATION

NOTE

Wiring harness and leads are secured in place by clips, wire ties, cushion clamps, and screw terminals.

Make sure harness is secure and all hardware is tight.

Install and connect overhead cab wiring harness using illustration and table as a guide.

Install head liners (WP 0177 00).