Click here to make tpub.com your Home Page

Page Title: REMOVAL - CONTINUED
Back | Up | Next

Click here for thousands of PDF manuals

Google


Web
www.tpub.com

Home


   
Information Categories
.... Administration
Advancement
Aerographer
Automotive
Aviation
Construction
Diving
Draftsman
Engineering
Electronics
Food and Cooking
Logistics
Math
Medical
Music
Nuclear Fundamentals
Photography
Religion
   
   

 

TM 9-2320-303-24-2
ENGINE MOUNTS REPLACEMENT - CONTINUED
0230 00
REMOVAL - CONTINUED
8
9
10
11
12
13
14
15
16
CAUTION
Lift engine only enough to remove washers and isolators. Check clearance above engine to avoid damaging
any component.
9.
Lift rear of engine and support rear of engine with engine stands.
10.
Remove two washers (11), two washers (14), and isolators (12) from rear engine mount (13).
11.
Repeat steps 8 and 10 for opposite engine mount, if necessary.
INSTALLATION
NOTE
Perform steps 1 through 3 to install isolators at REAR engine mounts.
1.
Install two isolators (12), two washers (14), and washers (11) to rear engine mount (13) and to opposite engine mount, if
removed.
2.
Lower rear of engine and install adapter (10), two bolts (8), two washers (9), four washers (15), and two nuts (16).
3.
Remove engine stands and engine jack. Tighten nuts to 160 lb-ft. (216 Nm).
NOTE
Perform steps 4 through 8 to install isolators at FRONT engine mount.
4.
Loosely install two upper isolators (4), two lower isolators (6), and adapter (3) to front engine mount (5) with two bolts
(7), four washers (2), and two nuts (1).
5.
Remove engine stands from front of engine and lower engine.
6.
Tighten nuts (1) to 241 lb-ft. (327 Nm).
0230 00-3

Privacy Statement - Press Release - Copyright Information. - Contact Us

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business