 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-2
ENGINE MOUNTS REPLACEMENT - CONTINUED
0230 00
REMOVAL
1.
Remove four screws, washers, and fan shroud from radiator.
NOTE
Perform steps 2 through 5 to remove isolators at FRONT engine mount.
2.
Attach chain to lifting eye at front of engine and attach other end of chain to suitable lifting device. Lift chain to remove
slack.
3.
Remove two nuts (1), four washers (2), two bolts (8), and adapter (3).
CAUTION
Lift engine only enough to remove isolators. Check clearance above engine to avoid damaging any compo-
nent.
1
2
3
4
5
6
2
7
402-529
4.
Lift front of engine and support front of engine with engine stands.
5.
Remove two lower isolators (6) and two upper isolators (4) from front engine mount (5).
NOTE
Perform steps 6 through 11 to remove isolators at either of two REAR engine mounts.
6.
Place engine jack at rear of engine and raise jack to support engine.
7.
Loosen two nuts at engine mount opposite engine mount to be removed.
8.
Remove two nuts (16), four washers (15), two washers (9), two bolts (8), and adapter (10).
0230 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals