|
|
TM 9-2320-303-24-2
Table 1. Steering System Troubleshooting Procedures - Continued.
MALFUNCTION
TEST or INSPECTION
CORRECTIVE ACTION
2. External Oil Leaks from Steering Gear - 1. Check for leak at rubber relief Replace steering gear (WP 0265
Continued.
plug (on frame side of steering 00).
gear).
2. Check for leak at shaft seals.
Replace steering gear (WP 0265
1. Disconnect lower steering 1. Replace defective tilt steering
3. Oversteer or Darting.
column (WP 0266 00).
column from steering gear and
check steering column for
binding.
2. Replace defective universal
joint (WP 0157 00).
2. Disconnect
steering gear Replace defective components
pitman arm and check front end (WP 0158 00).
components for binding.
1. Check for sufficient pump If pressure is less than 900 psi
4. High Steering Effort in One Direction.
pressure (Malfunction 1, step (62.07 bars), replace power
2).
steering pump (WP 0264 00).
2. Check for sufficient pump flow Replace power steering pump
(Malfunction 1, step 3).
3. Check for defective teflon seals Replace steering gear (WP 0265
in steering control valve.
4. Check for steering gear control Replace steering gear (WP 0265
valve sticking.
5. High Steering Effort in Both Directions.
1. Check for sufficient pump If pressure is less than 900 psi
pressure (Malfunction 1, step (62.07 bars), replace power
2).
steering pump (WP 0264 00).
2. Check for sufficient pump flow Replace power steering pump
(Malfunction 1, step 3).
3. Check for defective teflon seals Replace steering gear (WP 0265
in steering control valve.
4. Check for steering gear control Replace steering gear (WP 0265
valve sticking.
5. High steering effort in one Replace steering gear (WP 0265
direction.
END OF WORK PACKAGE
0226 00-3/4 blank
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |