|
|
TM 9-2320-303-24-2
STEERING SYSTEM TROUBLESHOOTING
THIS WORK PACKAGE COVERS
Steering System Troubleshooting Procedures
INITIAL SETUP
Tools and Special Tools - Continued
Maintenance Level
Tester, power steering (Item 98, WP 0313 00)
Direct Support
Materials/Parts
Tools and Special Tools
Rag, wiping (Item 39, WP 0312 00)
Tool kit, general mechanic's (Item 102, WP 0313
Adapter kit, mechanical (Item 3, WP 0313 00)
Table 1. Steering System Troubleshooting Procedures .
MALFUNCTION
TEST or INSPECTION
CORRECTIVE ACTION
1. Disconnect lower steering 1. Replace defective tilt steering
1. No Recovery.
column (WP 0266 00).
column from steering gear and
check steering column for
binding.
2. Replace defective universal
joint (WP 0157 00).
2. Check for sufficient pump
pressure as follows:
(a) Disconnect pressure hose
from power steering pump.
(b) Connect adapter hose from
adapter kit to power steering
pump.
(c) Connect hose from dial end
of power steering tester to
adapter hose.
(d) Connect hose from load
valve end of power steering
tester to pressure hose.
CAUTION
Before performing step e, ensure load valve is completely open
to prevent damage to flow/pressure valve.
(e)
With engine idling, rotate
steering wheel to left and
right for 5 minutes to warm
power steering fluid.
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |