 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
HOOD ADJUSTMENT
THIS WORK PACKAGE COVERS
Adjustment Check, Adjustment
INITIAL SETUP
Materials/Parts
Maintenance Level
Unit
Nut, lock (P/N M45913/1-8CG5C) (6)
Tools and Special Tools
Shim(s) (P/N 17-10320-001)
Tool kit, general mechanic's (Item 102, WP 0313
Personnel Required
Bar, wrecking (Item 4, WP 0313 00)
Two
Wrench, torque, 0-300 lb-in (Item 109, WP 0313
References
Wrench, torque, 50-250 lb-ft (Item 111, WP 0313
TM 9-2320-303-10
ADJUSTMENT CHECK
NOTE
Perform steps 1 through 3 to determine if hood adjustment is necessary.
1.
Measure and note gap between rear edge of hood (1) and cowl (2) at seam and at 8 in (203 mm) below seam. Gap should
be 1/2-3/4 in (13-19 mm).
2.
Check that front of hood (1) is centered with bumper (3). Check that space between top edge of bumper (3) and lower
edge of hood (1) is equal at both ends.
3.
Ensure that hood (1) is not touching any components attached to frame. If any components are touching hood, identify
and correct problem, and repeat steps 1 and 2.
1/2-3/4 IN (13-19 MM)
CLEARANCE
1
1
2
BOTH SIDES
3 SEAM
EQUAL
3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals