 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
CAB DOOR ADJUSTMENT - CONTINUED
0175 00
ADJUSTMENT - CONTINUED
6.
Repeat steps 4 and 5 until cab door (9) is properly adjusted.
NOTE
Cab door is fully closed when you hear two clicks of door latch, and should not have to be slammed shut. If
it is necessary to slam cab door shut, door must be adjusted.
7.
With cab door (9) fully closed, check in-out position of top of cab door and flange (10) at hinge (11). Cab door must be
flush 1/16 in. (1.58 mm).
NOTE
Perform steps 8 and 9 only if required.
8.
To adjust top of cab door (9), loosen adjusting screw (2) and move cab door in or out to required measurement. Tighten
adjusting screw.
9.
Repeat steps 7 and 8 until top of cab door (9) is properly adjusted.
10.
With cab door (9) fully closed, check in-out position of bottom of cab door and flange (10) at hinge (11). Cab door must
be flush 1/16 in. (1.58 mm).
NOTE
Perform steps 11 and 12 only if required.
11.
To adjust bottom of cab door (9), loosen adjusting screw (3) and move cab door in or out to required measurement.
Tighten adjusting screw.
10
2
9
11
3
12.
Repeat steps 10 and 11 until bottom of cab door (9) is properly adjusted.
0175 00-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals