 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
FRONT HUB, DRUM, WHEEL BEARINGS, AND SEAL REPLACEMENT - CONTINUED
0154 00
REMOVAL - CONTINUED
3.
Remove brake drum (11) from hub (5).
NOTE
Place suitable container under hub opening to catch axle oil.
4.
Remove six screws (17), lockwashers (16), hub cap (19), and gasket (15) from hub (5). Discard gasket and lockwashers.
5.
Bend back tab on lockwasher (20).
6.
Remove jamnut (14), lockwasher (20), lock ring (13), and adjusting nut (21) from axle spindle (10). Discard lockwasher.
7.
Remove outer wheel bearing (12) from axle spindle (10). Outer bearing race (4) will remain in bore of hub (5).
8.
Remove hub (5) from axle spindle (10).
9.
Remove oil seal (9) and inner wheel bearing (8) from hub (5). Discard oil seal.
NOTE
Perform step 10 if bearing races are damaged or if installing new bearings.
10.
Remove inner bearing race (7) and outer bearing race (4) from bore of hub (5).
NOTE
ABS tone ring must be replaced if ring is damaged or if replacing hub.
11.
To remove ABS tone ring (6) from hub (5), tap lightly beneath ring with a small hammer. Use a circular pattern with
light tapping to prevent ring from cocking.
10
9
8
7
6
5
4
21
20
11
19
18
12
17
13
14
15
16
0154 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals