 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
ALTERNATOR AND VOLTAGE REGULATOR REPLACEMENT - CONTINUED
0058 00
ALTERNATOR REMOVAL - CONTINUED
4.
Loosen upper jamnut (14) and lower jamnut (16) on adjusting rod (13).
5.
Loosen bolt (30) and washer (31) securing alternator (29) to adjusting rod endlink (15).
6.
Remove bolt (19), lockwasher (17), washer (18), and adjusting rod (13) from cylinder block (20). Discard lockwasher.
7.
Loosen bolt (22) securing alternator (29) from mounting bracket (21).
8.
Rotate alternator (29) toward cylinder block (20) and remove two drivebelts (27) from alternator pulley (28).
9.
Remove bolt (30) and washer (31) securing alternator (29) to adjusting rod endlink (15).
10.
Remove bolt (22), two washers (23), nut (24), and alternator (29) from mounting bracket (21).
11.
Remove nut (25), washer (26), and pulley (28) from alternator (29).
16
15
14
17,18
13
19
20
31
30
29
28
27
25,26
402-909
21
22,23,24
ALTERNATOR INSTALLATION
1.
Position pulley (28) on alternator (29) and install washer (26) and nut (25).
2.
Position alternator (29) on mounting bracket (21) and install bolt (22), two washers (23), and nut (24). Do not tighten
bolt and nut.
3.
Position alternator (29) to adjusting rod endlink (15) and install bolt (30) and washer (31). Do not tighten bolt.
4.
Rotate alternator (29) toward cylinder block (20) and install two drivebelts (27) on alternator pulley (28).
5.
Rotate alternator (29) away from cylinder block (20).
6.
Tighten bolt (22) securing alternator (29) to mounting bracket (21).
7.
Install adjusting rod (13) to cylinder block (20) with bolt (19), new lockwasher (17), and washer (18).
8.
Tighten bolt (30) securing alternator (29) to adjusting rod endlink (15).
0058 00-2
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals