 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-303-24-1
THERMOSTAT AND HOUSING MAINTENANCE - CONTINUED
0047 00
INSTALLATION
NOTE
Rubber seal must be installed with part number or metal flange of seal toward mandrel to ensure proper seal-
ing.
1.
Install rubber seal (12) in thermostat housing (11) using thermostat seal mandrel.
2.
Install new thermostat (13), new gasket (14), and thermostat housing (11) on engine.
3.
Secure thermostat housing (11) with four capscrews (7) and washers (6).
4.
Secure new gasket (5) and elbow (3) with two capscrews (2) and washers (1).
5.
Screw compressor coolant line (15) to fitting (8).
6.
Install hose (9) to thermostat housing (11) using bypass hose clamp (4) and radiator inlet hose clamp (10).
7.
Fill cooling system.
OPERATIONAL CHECK
1.
Start up engine (TM 9-2320-303-10).
NOTE
Make sure coolant is to the top of the radiator sight glass.
2.
Check cooling system for leaks at thermostat housing.
END OF WORK PACKAGE
0047 00-3/(0047 00-4 blank)
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals