 |
|||
|
|
|||
|
Page Title:
OIL LINES INSPECTION/REPLACEMENT |
|
||
| ||||||||||
|
|
 TM 9-2320-303-24-1
ENGINE OIL FILTERS AND LINES MAINTENANCE - CONTINUED
0028 00
OIL LINES INSPECTION/REPLACEMENT
1.
Remove filter-to-pump line (20) and filter-to-sump line (21) from two connectors (18 and 19). Inspect for cracks, stains
from leaks, kinks, and end fittings damage.
2.
Remove two connectors (18) and (19) from oil pump and oil sump. Replace if threads are damaged.
3.
Coat threads and install two connectors (18) and (19) into oil pump and oil sump.
4.
Install filter-to-pump line (20) and filter-to sump line (21) onto connectors (18) and (19).
CHECK FOR LEAKS
1.
Start engine (TM 9-2320-303-10) and run 3-5 minutes.
2.
Shut down engine (TM 9-2320-303-10) and let set for 8-10 minutes.
3.
Check primary filter (30), drain plug (31), connectors (18) and (19), two elbows (22), draincock (16), cover (4), filter-to-
pump line (20) and filter-to-sump line (21) for leaks.
4.
Remove dipstick (32) and check oil level. Oil level should be near "H" mark. Fill as necessary.
4
31
30
22
16
21
20
19
18
END OF WORK PACKAGE
0028 00-4
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals